Quantcast
Channel: ASRock Forums
Viewing all 36739 articles
Browse latest View live
↧

Intel Motherboards : H110 BTCPro+ does not recognize more than 1 GPU

September 16, 2018, 1:45 pm
$
0
0
Author: jsam2018
Subject: H110 BTCPro+ does not recognize more than 1 GPU
Posted: 16 Sep 2018 at 8:45pm

Fixed !!

this was a riser problem ... maybe mixed with a driver issue ?
I purged all the drivers and nvidia stuff, reinstalled the ppa and reinstalled the drievrs anew.

Then, i had to put a new riser as it firstly was still not recongnized. Then I gradually put all
my cards.
Now they are all recognized  SmileSmile
↧
Search

AMD Motherboards : b450m mobo fan control does not work

September 16, 2018, 1:51 pm
$
0
0
Author: Taxxi
Subject: b450m mobo fan control does not work
Posted: 16 Sep 2018 at 8:51pm

Originally posted by datonyb datonyb wrote:

set cpu fan monitoring to 'tctrl' in bios

Thank you sir, I think that might be the cause. I'll definitely try that after my old 2TB HDD successfully moves all the stuff to the new drive... BTW the fans can target the mobo temps just fine, am I correct?


Edited by Taxxi - 4 hours 22 minutes ago at 8:51pm
↧
↧

Intel Motherboards (German) : Bios Update 3.10 Asrock z370 Extreme4

September 16, 2018, 2:14 pm
$
0
0
Author: root1179
Subject: Bios Update 3.10 Asrock z370 Extreme4
Posted: 16 Sep 2018 at 9:14pm

Moin zusammen,

ich klink' mich hier auch mal eben mit ein :)

Ein paar Infos, falls wichtig:

- Windows 10 Pro x64 Build 17134.285 (1803/RS4)
- Asrock Z370 Extreme 4
- i7 8700K
- 16GB Corsair Vengeance LPX DDR4-3000 CL15 Dual Kit (Installiert in A2 und B2)
- GTX 1080 Ti AORUS Xtreme
- Samsung 970 Evo - 250GB NVMe
- Samsung 860 Evo - 2TB SATA


Ich besitze ebenfalls dieses Board und konnte feststellen, dass mein System nach dem BIOS-Update von 1.80 auf 3.10 nicht mehr einwandfrei lief.


Festgestellt habe ich:
- BIOS absolut langsam und so gut wie kaum zu bedienen
- USB-Probleme > Windows 10 meldet, dass "das letzte USB-Gerät, das an diesen Computer angeschlossen wurde, nicht ordnungsgemä? funktioniert". Angeschlossen waren aber lediglich Maus + Tastatur. Unten rechts in der Systray hüpft dann auch ein USB-Symbol immer an und aus, was auf Dauer etwas aggressiv macht Tongue ... und wenn man im Gerätemanager nachschaut, hüpft auch dort unter "USB-Controller" einiges hin und her.

RAM hatte ich jeweils auf Standard als auch auf XMP-Profil laufen. Gab keinen Unterschied in den Beobachtungen.

Als ich dann wieder auf das BIOS 1.80 zurück ging, funktionierte das System dann wieder so gut wie einwandfrei. "So gut wie", weil die Geschwindigkeit des BIOS ohne hin etwas träge ist und dies wohl vermutlich der UEFI-Sache selbst geschuldet ist. Das alte non-UEFI-BIOS war generell schneller.

Wie es mir scheint, bringt das BIOS 3.10 bei verschiedenen Systemen auch verschiedene Probleme mit sich.

Im Prinzip wollte ich ganz gerne auf das neueste BIOS, um dann später auf i7 9700k oder i9 9900k aufzurüsten.

Vielleicht helfen die gesammelten Infos, um das neue BIOS mal unter die Lupe zu nehmen.

Bis dahin
Viele Grü?e
root1179






EDIT:

Die USB-Probleme sind wieder aktuell. Scheinbar brauchte das Problem ca. eine Stunde, um wieder aufzutreten. Nun kann ich mir das nicht mehr erklären.

An den USB-Geräten (Maus + Tastatur) hat sich nichts geändert und auch andere Geräte hab ich nicht angeschlossen.






EDIT 2:

Nun hab ich im BIOS unter "USB" den Punkt "Third Party USB 3.1 Controller" deaktiviert und meine USB Probleme sind vorerst vorbei. Auch das BIOS ist wieder schön schnell.

Kann das ein Defekt sein oder eher ein Treiberproblem? Wobei sich ja ein Treiberproblem nicht im BIOS bemerkbar machen sollte.


Bord reklamieren?


Viele Grü?e




Edited by root1179 - 2 hours 16 minutes ago at 10:57pm
↧

AMD Motherboards : ASRock B450M Pro4 additional fans?

September 16, 2018, 2:41 pm
$
0
0
Author: Taxxi
Subject: ASRock B450M Pro4 additional fans?
Posted: 16 Sep 2018 at 9:41pm

I'm thinking about installing more fans and I wanted to check what I'm going to do makes sense. So first of all, here is the specifications of my mobo:

CPU Fan Connector (CPU_FAN1)
CPU/Water Pump Fan Connector (CPU_FAN2/WP)
Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
Chassis/Water Pump Fan Connector (CHA_FAN3/WP)

The last 4 connectors can be all detected whether they are 3-pin or 4-pin, all of them can be controlled by Smart Fan Speed Control and have (2A, 24W) maximum limitation.

Now I want to add 2 more fans, and the remaining headers are CPU_FAN2/WP and CHA_FAN1/WP. I'm not sure if I can just put 2 fans into those slots, in particular I'm not sure if I can put it in the CPU_FAN2 header. I think I can just put it there and make it target for the mobo temp in the UEFI but not so sure about it.

Also about fan splitters; the fan I'm looking for is Noctua NF-S12B. The product page says the max current is 0,075A, so this means I can use a splitter to connect two of them into a single header, right? Those fans are pwm, but regardless of the fact, I should be able to regulate the speed in the UEFI, am I correct? In fact, if the information is correct, I should be able to connect something like 4 fans into 1 header without a problem...

I just wanted to be sure since this is my first time installing additional fans with my first build. Any helpful information would be appreciated!
↧

AMD Motherboards : PSA: Stay away from 4.80 BIOS X370 Taichi

September 16, 2018, 6:41 pm
$
0
0
Author: bigboss
Subject: PSA: Stay away from 4.80 BIOS X370 Taichi
Posted: 17 Sep 2018 at 1:41am

next bios in 4 months
↧
↧

Intel Motherboards : SATA3_0_1 not detecting SSD or HDD on Z370 Taichi

September 16, 2018, 7:07 pm
$
0
0
Author: bobfff
Subject: SATA3_0_1 not detecting SSD or HDD on Z370 Taichi
Posted: 17 Sep 2018 at 2:07am

I have a similar issue and none of the solutions offered so far work. Setup:
Z370 Taichi, 16 MB DDR4, EVO 970 NVMe.M.2 1 GB. EVO 540 1 GB, WD HDD 1 GB.

EVO 540 located on SATA3_0, WD on SATA_A1. EVO 970 originally installed in slot M2_2.  EVO 540, original boot drive, successfully cloned to the EVO 970.  Note, nothing connected to the SATA3 connectors that share lanes with the M2_2. BIOS Advanced storage shows the EVO 540 and the WD HHD. The Boot menu also shows the EVO 540 and the WD but not the EVO 970. However, Windows 10 Disk Management shows the EVO 970 as does the Samsung Magician software. 

The EVO 970 has the most recent hardware update and the Samsung NVME device manager has been added. I have pulled the power cord and cleared BIOS but drive still does not appear. However, if I hit F11 to show boot options, the EVO 970 does appear as an option though not occupying one of the three NVME locations. Selecting the 970 boots Win10 without problems.

I have removed all SATA connectors, leaving the 970 in slot M2_2, cleared CMOS, but the drive still does not appear in the Advanced storage options but does appear in the Boot options. Again, not as an NVME device.

I have moved the 970 to slot M2_1 (again, no other SATA devices connected), cleared CMOS, and it still does not appear as an option in Advanced storage.

Frustrated and looking for suggestions.

Thanks!

Bob


↧

Product News : ASRock Gaming Reinvents Routers with G10

September 16, 2018, 8:39 pm
$
0
0
Author: zandyr
Subject: ASRock Gaming Reinvents Routers with G10
Posted: 17 Sep 2018 at 3:39am

I installed it some time ago, and it works very well. It's much faster and more stable than my old router.




Edited by zandyr - 1 hour 43 minutes ago at 3:40am
↧

AMD Motherboards : X370 Taichi Debug 00

September 16, 2018, 10:21 pm
$
0
0
Author: Onslaught2k3
Subject: X370 Taichi Debug 00
Posted: 17 Sep 2018 at 5:21am

code 00 means CPU initialization, it often means CPU failure.  If possible, find someone you trust with an AM4 mobo and CPU to make sure.  You honestly don't want to have to RMA both if possible.
↧
Search

Networking Products : G10 rebooting itself

September 16, 2018, 10:37 pm
$
0
0
Author: skeptex
Subject: G10 rebooting itself
Posted: 17 Sep 2018 at 5:37am

dear support,

I ordered the G10 router (without dongle) and Im very satisfied with range/speed and Im overall impressed with the good performance! thumbs up!

but for some reason the router sometimes triggers to reboot itself when certain actions are being made in the network - wireless connection suddenly drops completely and router reboots, then everything goes back to normal until connection drops out again!

I found out, when I use apple airplay in the network (streaming wireless to airport express or apple tv) everything seems fine for a while, but after some short time the connection drops for all devices and router reboots for some reason! Im not sure what triggers it, but when I select next music track / next video via apple airplay for example (working fine in the beginning), this problem appears most of time and is mostly reproduceadble! like there is a some kind of short disconnect/reconnect when skipping to the next track while streaming, which router somehow doesnt like and reboots.. then you have to wait for router to finish rebooting until it works again..

other than that - absolutely no issues and constant connection for all device types, until airplay or similar streaming service is being used - there is some kind of issue what causes the connection to drop and force the router to a reboot !

- latest firmware has been installed day one
- IPv6, gaming boost, self healing - all disabled
- I set manual IP reservation via MAC adress for about 15 devices, no issues
- I moved all devices from 2,4 to 5,0 band and vice versa, same issue nothing changed
- is there some kind of log or diagnostics in the G10 router? what couldbe the issue?

can someone from the support team please chime in, I would appreciate some help regarding this case, I have also seen there are some similar reports/reviews/threads about the G10 rebooting itself for some reason, but I wasnt able to find some helpful information!

I hope its possible to sort this described issue out - can you please let me know if you have some further information, if this is a known problem or if there is something what I can do?

perfect router for my needs and I really would like to keep using the G10 !

thanks in advance for your support!

best regards,
skeptex
↧
↧

Intel Motherboards : HDMI2.0a with HDR on Fatal1ty Z270 Gaming-ITX/ac

September 16, 2018, 11:11 pm
$
0
0
Author: irrelevhack
Subject: HDMI2.0a with HDR on Fatal1ty Z270 Gaming-ITX/ac
Posted: 17 Sep 2018 at 6:11am

I'm also wondering about the results you got. i'm myself interested in the amd version of this board, that also basically said only hdmi 2.0 and DP 1.2. No DP 1.3 or hdmi 2.0a what's so ever. 

you are saying that a chip inside your mobo allow hdmi 2.0a signal to be transferred through the display port 1.2 port of the board? I really don't understand.

basically like everybody i want to know if i can playback whatever uhd content (10 bits, 12bits, hdr, 60fps.. all in 4k off course) with this board.

for now it look like that it is possible, at least at 30hz, but I didn't found anything that can confirm it.

anyway REAL 4K 10bits HDR 4:4:4:4 @ 60fps shouldn't be possible, because neither hdmi 2.0 or dp 1.2 have enough bandwith to do so. 
↧

AMD Motherboards : PC won't power up with SATA, m.2 not working

September 16, 2018, 11:13 pm
$
0
0
Author: Tiphae
Subject: PC won't power up with SATA, m.2 not working
Posted: 17 Sep 2018 at 6:13am

Hello!

This morning my ~1 year old pc wouldn't boot. Swapped PSUs and can get it powered up with CPU/MB/GPU plugged in, but it won't power up with any SATA power attached - with no SATA powered it says no partitions are found and the OS is on an m.2 on the MB. Looking for help narrowing down the issue - the m.2 apparently not being seen has me worried about the MB. This pc and my server are plugged into a UPS; UPS and other server seem fine, and plugging into wall makes no difference.

Specs:
EVGA 650 G3 PSU
Taichi x370 MB
Ryzen 1700 CPU
NVidia GTX 1080TI GPU
32GB G.Skill Flare X 3200 DDR4 memory
Samsung 960 M.2 for OS
two other SSD (games and FTP), one 7200 HDD for storage
↧

Intel Motherboards : z179 Gaming K6

September 16, 2018, 11:26 pm
$
0
0
Author: Animalm4st3r
Subject: z179 Gaming K6
Posted: 17 Sep 2018 at 6:26am

YOu installed your graphic drivers, and you are using your GPU and not the IGPU?
↧

Intel Motherboards : Z370 Extreme4 No Display

September 16, 2018, 11:31 pm
$
0
0
Author: Animalm4st3r
Subject: Z370 Extreme4 No Display
Posted: 17 Sep 2018 at 6:31am

Have you tried. Clearing CMOS or setting bios to Dedicated CPU
↧
↧

AMD Motherboards : Mother Bord x470 wont display anything

September 16, 2018, 11:41 pm
$
0
0
Author: austnikl
Subject: Mother Bord x470 wont display anything
Posted: 17 Sep 2018 at 6:41am

https://www.reddit.com/r/PCMaintenance/comments/9gcf8y/pc_wont_start_up_no_display_someone_help_me_please/?st=JM5EOUVZ&sh=b3efe90d

keeps turning on and off 
↧

AMD Motherboards : Fatal1ty B450 Gaming K4 - Fan Control doesn't work

September 17, 2018, 8:04 am
$
0
0
Author: fnordie
Subject: Fatal1ty B450 Gaming K4 - Fan Control doesn't work
Posted: 17 Sep 2018 at 3:04pm

this should be made sticky! ;)
↧
Search

Intel Motherboards (German) : Bios Update 3.10 Asrock z370 Extreme4

September 17, 2018, 8:24 am
$
0
0
Author: J Z
Subject: Bios Update 3.10 Asrock z370 Extreme4
Posted: 17 Sep 2018 at 3:24pm

Das kann schonmal vorkommen, wenn USB Geräte die ja normalerweise UEFI programmiert sind, sich nicht bestimmten Treibern vertragen, da ja im UEFI Mode das Betriebssystem mit dem BIOS Daten austauscht.

Bist du sicher, dass alle Treiber aktuell sind (auch die ME-Software) und du auch die neuste Win10 Build 1803 Version hast ?
↧

Intel Motherboards : J5005: Should this PCIe card work?

September 17, 2018, 9:37 am
$
0
0
Author: Anquetil
Subject: J5005: Should this PCIe card work?
Posted: 17 Sep 2018 at 4:37pm

Simple question.

Should this tuner card work in a j5005?
http://www.hauppauge.com/pages/products/data_quadhd.html

J5005: 1 x PCI Express 2.0 x1 Slot
Hauppauge: PCI Express slot, x1
↧
↧

AMD Motherboards : X470 taichi error 46

September 17, 2018, 10:25 am
$
0
0
Author: cx5
Subject: X470 taichi error 46
Posted: 17 Sep 2018 at 5:25pm

try your luck using one stick only !!! good luck !!!
↧

Intel Motherboards : J5005 BIOS update

September 17, 2018, 7:40 pm
$
0
0
Author: Xaltar
Subject: J5005 BIOS update
Posted: 18 Sep 2018 at 2:40am

Hmm, well, I don't have a board like yours to test with so I am out of ideas Confused

Open a support ticket with ASRock Tech Support, they should be able to tell you what's up:

https://event.asrock.com/tsd.asp

If anyone else reading this has any ideas, feel free to chime in.
↧

Intel Motherboards (German) : X299 Asrock Taichi XE M.2 HDD verschwindet

September 17, 2018, 8:24 pm
$
0
0
Author: meinereiner2901
Subject: X299 Asrock Taichi XE M.2 HDD verschwindet
Posted: 18 Sep 2018 at 3:24am

Jetzt habe ich das UEFI mit cmosclear zurückgesetzt,alle externen USB Laufwerke(3stk) ausgesteckt.
Dann habe ich im UEFI die Sata Ports auf AHCI zurückgesetzt,im Windows die Raid0 Verbunde gekillt und über Windows die Raid0 neu erstellt,sozusagen ohne den Intel RST Mist.
Und welch ein Wunder,bis jetzt ist die M.2 Sata SSD nicht abgestürzt.
Und plötzlich startet die Kiste auch wieder schnell und karpft nicht ewig beim UEFI Selbsttest rum.

Allerdings ist mir jetzt aufgefallen das wenn die M.2 SAtA ssd aussteigt dann auch im UEFI verschwunden ist und erst wieder nach einem Kompletten Neustart erscheint (Vorher vom Netz trennen)

Andere Frage.
Ich habe 2 GTX 1070 im sli verbaut die CPU unterstützt nur 28 Lanes (Nicht optimal)
Die erste läuft mit 16 die andere mit 8 Lanes und im Handbuch steht das der erste M.2 Slot auch noch 4 Lanes frisst.Also 16+8+4=28 Voll belegt.
Also kann ich keine weitere pciexp karte mehr einbauen?Anscheinend nicht weil es nicht funktioniert.
Jetzt habe ich aber gelesen das wenn ich den M.2 2ten oder 3 ten Slot verwenden würden diese 4 lanes nicht von der CPU sondern vom Chipsatz direkt kommen?
Dann sollten doch wieder 4 zur Verfügung stehen oder nicht?
Aber trotzdem kann ich keine weitere Karte elektrisch anbinden.
Habe im BIOS was zu der verteilung gefunden 1010 Settings oder so ähnlich?
Aber das ist ja sowas von unverständlich beschrieben.
zB. Steht da  101PCIex_4 / M.2_2    Auto oder x4x4x4 x4  usw...
Da ist von 2 Steckplätzen die Rede aber ich kann auf 4 aufteilen?? Welcher Mensch soll das verstehen?
Bei meinem ASUS Rampage IV extreme hatte ich dafür einen Idiotensicheren PCIexpress Lane Simulator im UEFI.

Also immoment bin ich sehr unzufrieden mit Asrock.

↧
Viewing all 36739 articles
Browse latest View live
Search